electrade.no


    



IR-byggesett





Alle byggesett består av printplate og nødvendige komponenter for montering på printplaten. Utstyr som strømforsyning/trafo, kabinett, etc. kommer i tillegg dersom ikke noe annet er nevnt. Byggesettene leveres med norsk eller engelsk byggeveiledning.

All kits includes the circuit board and components to build the kit. Things like power supply, enclosures, terminals, etc. is not included if not mentioned in the text below. All kits includes English user manual, if nothing else is mentioned in the text below.


IR SENDER OG MOTTAKER 10 CM
Består av sender- og mottaker. Kan f.eks. brukes til modelljernbane for å erstatte bruk av reedkontakter, som inn- og utflygingsindikator på fuglekasser eller bikuber, etc. Når IR-strålen blir brudt lyser en LED. For å styre høyere laster, kan det leveres et relékort (Varenr. 132-243 Relékort for lav strøm. ) som passer til byggesettet. Spenning: 6 - 12 V DC. Mål: Ca. 44 x 15 mm.

Infrared light barrier with transmitter and receiver. Application: For the model railway, entry holes for aviaries, beehives etc. With invisible infrared light ray. The LED extinguishes if the light barrier is interrupted. Operating voltage: 6 to 12V DC Range: Approx. 10 cm. Board dimensions: approx. 44 x 15 mm. As accessories is available kit "132-243 Relay card 12V DC for low current". It is possible to connect it with the light barrier and to switch with the relay contact other loads up to 3A.
132-241 kr 45,00




IR SENDER OG MOTTAKER 5 METER
Sender og mottakerelektronikk er plassert på et kort. Den ene IR-LEDen plasseres i avstand fra kortet. Hver gang den "usynlige" strålen mellom de to IR-LEDene blir brutt lyser en LED. For å styre høyere laster, kan det leveres et relékort (Varenr. 132-243 Relékort for lav strøm.) som passer til byggesettet. Spenning: 12 V DC. Mål: Ca. 58x45mm.

Infrared light barrier with invisible infrared light ray and a range of max. 5 m. If the light ray is interrupted (if a person walks through the light ray), this will be indicated by a flashing LED. Operating voltage: 12V DC. Current consumption: < 100mA. Range: > 5m, with supplementary lens > 10m (not included). Transmitting frequency: Approx. 3.7 kHz. Board dimensions: approx. 58 x 45 mm. As accessories is available kit "132-243 Relay card 12V DC for low current". It is possible to connect it with the light barrier and to switch with the relay contact other loads up to 3A.
132-140 kr 89,00




IR SENDER OG MOTTAKER 50 METER
Med optikk og høy følsomhet på elektronikken. Senderkortet plasseres i maks. avstand på 50 meter fra mottakerkortet. Hver gang den "usynlige" strålen mellom de to kortene blir brutt lyser en LED. Spenning sender: 9 V DC, ca. 100mA. Spenning mottaker: 12 V DC, ca. 50mA. Releutgang: 25V 3A. Mål sender: Ca. 58x35mm. Mål mottaker: Ca. 57x45mm.

Infrared light barrier with the enclosed optics and highly sensitive photodetector this light barrier has a max. range of up to 50m! The infrared light ray is invisible for the human. If the light ray between the transmitter and receiver is interrupted (if a person walks through it) the relay in the receiver switches. Operating voltage transmitter: 9 V DC. Current consumption transmitter: Approx. 100 mA . Operating voltage receiver: 12 V DC. Current consumption: Max. approx. 50 mA. Range: Max. approx. 50 m. Relay contact receiver: 1 x switch over, max. 25 V 3 A . Size of board transmitter: Approx. 58 x 23 mm. Size of board receiver: Approx. 57 x 45 mm.
132-258 kr 245,00




FOTOCELLE
Når lys treffer fototransitoren, lyser en LED. For å styre høyere laster, kan det leveres et relékort (Varenr. 132-243 Relékort for lav strøm.) som passer til byggesettet.Spenning: 3-12V DC Mål: Ca. 45 x 15 mm.

Whenever there is incidence of light onto the phototransistor, the light barrier will switch on a light emitting diode. As soon as the light beam will be interrupted, the LED will switch off. Operating voltage: 6 to12V DC. As accessories is available kit "132-243 Relay card 12V DC for low current". It is possible to connect it with the light barrier and to switch with the relay contact other loads up to 3A. Operating voltage: 6 to12V DC. Board dimensions: Approx. 45 x 15 mm .
132-246 kr 42,00




IR-NATTLYS FOR KAMERA
IR-lyskilde for digitalkamera og videokamera. Byggesettet gjør objekter i mørket synlige for disse kameraene. Gjør det mulig å ta kameraopptak eller stillbilde i mørket. Ideell for sikkerhetsovervåking i mørket. Spenning: 12-24V DC. Strøm: Ca. 300mA. Rekkevidde: 5 meter. Lysfrekvens: Ca. 870 - 950 nm. Mål: Ca. 75 x 56 mm.

With this infrared spotlight CCD- and video cameras may recognize objects also in complete darkness. The infrared light is invisible for a human, CCD-cameras can see well with an infrared spotlight. Perfect for inconspicuous observation of entrances, drives etc. Operating voltage: 12 to14V DC. Range: Approx. 5m. Current consumption: approx. 300mA. Light frequency: Approx. 870 to 950nm. Board dimensions: Approx. 75 x 56 mm.
132-250 kr 109,00




OBS:
Fant du ikke det du søkte etter? Klikk her

Dersom du ikke har en meny på høyre side, klikk her !
Dersom det ikke skjer noe når du klikker på , klikk her !


  You did not find what you were looking for? Then please click here.

If you do not have a menu to the right, then please click here.
If nothing happens when you click on the -button, then please click here.



  Sie fanden nicht, was Sie suchten? Bitte, hier klicken.

Wenn Sie ein Menü nicht rechts haben, bitte hier klicken.
Wenn nichts geschieht, wenn Sie auf dem -Knopf klicken, bitte hier klicken.


© Electrade www.electrade.no